Unique TRIPLE-ICE Technology oilfree

without hydraulic drive

TRIPLE-ICE - Pellets, Slices and Blocks. A unique Dry Ice Technology, which is operating without the use of hydraulic drives, opens a clear new direction in today's techology of producing food grade dry ice. There are 16 advantages compared to our previous series. A reduction of up to 30% in production costs, less spare parts needed, snow chamber in one piece without any additional, exchangeable parts, lowest noise level down to approx. 52dBa and much more, are new unique key-points. Small and easy to install - no modification of the building. Dry is beeing pressed vertically not horizontally. Almost 0% breakage rate - unique on the world's market!

Full remote access to your dry ice machine to cut down intervention and service costs - fastest response time! Various forms of dry ice can be produced with our TRIPLE-ICE Technology. Slices, Blocks, Pellets with a diameter of 3 and 16mm. Our standard slice / block dimension is 150x150x18-120mm. We will naturally also produce your requested dimension, which can either be150x120 or 200x100 or 210x125. Whatever you may require, talk to us !

TRIPLE-ICE102 EMD

  • Your Dry Ice Business Starter!
  • Small Dry Ice Machine for dry ice Pellets, Slices and Blocks with a thickness from 18-60mm
  • Besides Slices and Blocks it also produces 3 and 16mm pellets
  • Slices and Blocks are pressed in laying position
  • Pellets are pressed vertically and always cut at the same length.
  • Super Hard Dry Ice Pellets with a high density
  • Easy and fast installation
  • No modification of the building
  • Stainless steel snowing chamber
  • 1 Declined Dry Ice Chute for Pellets
  • 1 Horizontal Dry Ice Chute for Slices and Blocks
  • Welded stainless steel frame
  • Output from 100 - 440kg/hr
  • No need of weighing scales as every pressing cycle produces the same amount of pellets

TRIPLE-ICE402 EMD 50% Redundancy in Production

  • 2 Dry Ice Machines into one unit!
  • Produces 800kg/hr high dense Dry Ice Pellets with various diameters.
  • Besides Slices and Blocks it also produces 3 and 16mm pellets
  • Slices and Blocks are pressed in laying position
  • Pellets are pressed vertically and always cut at the same length.
  • Super Hard Dry Ice Pellets with a high density
  • Easy and fast installation
  • No modification of the building
  • Stainless steel snowing and pressing chamber
  • 2 Declined Dry Ice Chutes for Pellets
  • 2 Horizontal Dry Ice Chutes for Slices and Blocks
  • Welded stainless steel frame
  • Output from 100 - 800 kg/hr
  • 2 fully independant Hydraulic Drives and Pressing Chambers
  • No need of weighing scales as every pressing cycle produces the same amount of pellets

Fast and easy exchangeable extruder plates without any tools

  • Fast exchange
  • No use of tools
  • Exchangeable within in less than 1 minute while the unit was in production for hours
  • Various extruder plates available for 3, 6, 10, 12 and 16mm
  • Each dry ice pellets has its own extruder plate, just a single plate.
  • Special hole geometry to provide hardest pellets ever
  • Pellets density easily trimmed by built-in software
  • One plate for slices and blocks no matter what thickness to be produced

Market Segments

Gas Companies

Gas Companies

Airline Catering

Airline Catering

Food Cooling

Food Cooling

Dry Ice Blasting

Dry Ice Blasting